hostbull.blogg.se - Phoenix awardbios cmos setup utility windows 7 usb

#Phoenix awardbios cmos setup utility windows 7 usb how to#
#Phoenix awardbios cmos setup utility windows 7 usb Pc#

Method 3: Allow the Asus PC to Detect an HDD or SSD

Close the computer up and restart it to see if the issue of the Asus Aptio Setup Utility loop is fixed.Make sure it is seated correctly and firmly. Plug the drive back into the socket on the motherboard.Locate and disconnect the disk’s connection from the motherboard.If the PC is a laptop, unscrew and remove its bottom. Open the computer casing if it is a desktop.In some cases, if your computer gets stuck in Aptio Setup Utility and cannot load the Windows operating system, one of the reasons is if the connection between your computer and your hard drive is loose, resulting in that the computer fails to detect its hard disk. Read More Method 2: Make Sure Your Hard Drive Is Connected Correctly If your PC still boots up to the setup utility instead of booting in the operating system, try other solutions to check. Just restart your computer and see if Aptio Setup Utility stuck is disappeared. This sounds like an obvious method and you can also try it out. According to several users, the problem with Aptio Setup Utility can be fixed by simply restarting your computer. Sometimes, the simplest method is the best one. Fixes for Aptio Setup Utility Stuck or Loop Method 1: Restart Your Asus Computer Thankfully, this issue can be fixed in Windows 10/8/7 and here we list some effective methods below. Additionally, the Asus computer is configured to not recognize the hard drive or the hard drive malfunction happens. Basically, this problem is triggered if the PC doesn’t detect an operating system on the drive that it can boot or it doesn’t have an SSD/HDD connected entirely. This is the issue that Asus laptops and desktops always experience. The computer is stuck in this setup utility with every new restart, resulting in the never-ending loop. Many Asus users have reported that they always encounter a problem with Aptio Setup Utility – the computer continuously boots into Aptio Setup Utility instead of loading the operating system. This utility can be called on the startup of your computer and it is a great way to customize communication between your devices. And it comes bundled with almost all ASUS computers including laptops and desktops. UEFI, a similar term, is an improved version of BIOS Legacy mode and it also needs a configuration utility to access it, like BIOS.Īptio Setup Utility is a kind of BIOS setup utility that is developed by American Megatrends. Depending on the hardware type that a computer uses, each computer has its own BIOS and configuration utility.

If there is no configuration utility, the computer cannot call and use BIOS. BIOS, short for Basic Input Output System, is used to store configurations that are essential for communication between devices in the system.

On each computer, there is always a configuration utility installed to access the BIOS menu. Some of you are curious about it and here we will introduce some information to you including a certain problem. Simply speaking, Aptio Setup Utility is a common name among Asus cards and laptops.

Fixes for Aptio Setup Utility Stuck or Loop.

Aptio Setup Utility Asus Windows 10/8/7.

#Phoenix awardbios cmos setup utility windows 7 usb how to#

This concludes how to access the Boot Menu from a Phoenix Award BIOS and set your System to Boot with USB. You can now proceed to boot Linux from your USB flash drive. If all went well, you should be presented with a boot screen containing your Live system.

If you have properly formatted, activated the partition and installed Linux to your USB device, you can reboot.

Note: If your USB device is not listed, you may need to set a boot flag on it to mark the partition active, so it can be detected as bootable.

Use the up/down arrow keys to select your Bootable USB from the list, and then press enter.

You should now see a menu similar to the one shown below.

Use the up/down arrow keys to select the Hard Disk option from the menu and press Enter to accept.

You should now be presented with a boot screen. Some commonly used BIOS Boot Menu keys are F2, F10, F11, and ESC Note: The key used to access your Boot Menu may vary.

During the system post tap the F11 key (or the key your specific board manufacturer specifies) to get into Boot Menu.

First insert a bootable USB flash drive into your computer, and reboot.

How to Set Boot Menu to Boot from USBĪccessing the Boot Menu or Boot Manager on a Phoenix or Award BIOS to set a computer to Boot with USB. At that time, this system was easily able to boot from any properly setup bootable USB or external hard drive I have thrown at it. The system used for this demonstration featured an MSI K8N Neo4 (MS-7125) motherboard.